Insights
Technical articles, standards comparisons, project case studies and buyer guides on pressure piping components, flanges and forged fittings.
Found us via Google? Get an ASTM/ASME pipe-fittings quote in 4 hours.
Send RFQ48 articles· Technical
TechnicalDuplex fittings require two distinct metallurgical checks: ferrite volume fraction by ASTM E562 and detrimental intermetallic phase detection by ASTM A923. Procurement buyers need to understand the difference before specifying.
TechnicalMacroetch per ASTM E340 helps reveal weld penetration, cracks, and HAZ features. Learn how it fits into ASME Section IX qualification, what to verify, and RFQ inputs for buyers.
TechnicalLearn how ASTM E1077 and A960/A960M apply to decarburization depth on heat-treated fittings, and what to specify in your RFQ to avoid disputes.
TechnicalGrain size testing under ASTM A182 is mandatory only for certain grades. Learn when ASTM E112 applies, which methods are used, and what buyers must verify before accepting a fitting.
TechnicalCharpy impact records for pipe fittings often include subsize specimens. Learn what ASTM E23 and A370 actually require, and where acceptance criteria must be found.
TechnicalWeld repair acceptance for A234 and other wrought steel fittings is governed by the product specification, A960/A960M common requirements, and the purchase order — not by a generic visual pass/fail rule. Here's what to verify.
TechnicalASTM A960 sets common requirements for wrought steel pipe fittings covered by individual ASTM product specs like A234. This guide explains what buyers must verify when ordering and inspecting fittings.
TechnicalHow to verify heat identity, heat analysis vs product analysis, mechanical test evidence, and RFQ requirements when buying forged flanges to ASTM A961 and A105.
TechnicalASME publishes separate standards for metallic and nonmetallic gaskets. This checklist helps buyers cross-check gasket type, flange facing, and procurement details before issuing an RFQ.
